Dosage
Use 3acid down carefully.Add to the fertiliser solution in several stages. Between each addition of the product, check the pH. Repeat the operation until you obtain the desired result.
General use
0.5 to 1ml per litreThe required dose depends on the quality of the water, the EC and the type of substrate. Usually the ideal pH for plants is between 5.4 and 6.5. For fast-growing plants, to improve the assimilation of Nitrogen (N) during the growing period, a pH of 5.6 is preferable. During flowering, to encourage the absorption of Phosphorous (P) and Potassium (K), adjust the solution to a pH of about 6.0-6.2.
Cleaning
3Acid down can also be used after cultivation to clean and eliminate waste and accumulations of salts in hydroponics systems.- Apply the product undiluted by soaking the elements as necessary and leave for 24 hours. - Rinse thoroughly.
Precautions
Keep locked away and out of reach of children.R35 - Causes severe burns. S1/2S26 - In the event of contact with the eyes, wash immediately with plenty of water and consult a specialist.S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.S45 - In the event of an accident or if you feel unwell, seek medical advice immediately (show the label where possible).S27 - Take off soiled or splashed clothing immediately.S28 - After contact with skin, wash immediately with plenty of water.S23 - Do not breathe the vapours.
Documents
|
pdf |
471 ko |
 |
|
pdf |
896 ko |
 |
|
pdf |
471 ko |
|
|
pdf |
480 ko |
 |
